RTO system composition:

The system consists of exhaust gas pretreatment drying, filter, switching air valve, combustion furnace, gas system, combustion support system, compressed air system and exhaust system.

How RTO works:

Regenerative thermal incinerator uses natural gas to directly burn organic waste gas, and decomposes organic molecules into C02 and H20 at a temperature of 750~850℃. After combustion, the flue gas stores heat in the ceramic through the regenerative ceramic tile, preheats the organic waste gas, and then discharges. The direction of the exhaust gas is automatically cut through the switching valve

Change, cycle work, RT0 can fully recover combustion organic decomposition heat energy, so that the system energy consumption is greatly reduced.

Application scope of RTO:

RTO system is suitable for moderate concentration (several noon ppm) air volume of 8000~30000m3, volatile organic waste gas and odor control.

Widely used in petrochemical, medical, carbon fiber, food additives, solar energy industry and other organic waste gas industry, organic waste gas treatment, treatment efficiency up to 95%.

High input cost and operation cost.

RCO regenerative catalytic combustion unit

I. Scope of application of RCO purification equipment

RCO equipment can be directly used in medium and high concentration (1000mg/m3-10000 mg/m3) organic waste gas purification; The RCO device can also be used in activated carbon adsorption concentrated catalytic combustion systems to replace the catalytic combustion and heater parts.

RCO treatment technology is particularly suitable for high heat recovery requirements, but also suitable for the same production line, due to different products, the composition of the exhaust gas often change or exhaust gas concentration fluctuations. Application industries include automobile, shipbuilding, motorcycle, bicycle, household appliances, container and other production plants painting production lines. Petroleum, chemical, rubber, paint, paint, shoe viscotic, plastic products, iron printing cans, printing ink, cable and enameled-wire production line waste gas treatment, especially suitable for the need for heat energy recovery of enterprises or drying line waste gas treatment, can be used for drying line energy recovery, so as to achieve the purpose of energy saving. The types of organic substances that can be treated include benzenes, ketones, esters, phenols, aldehydes, alcohols, ethers and hydrocarbons, among others.

Two. RCO purification principle

In the process of industrial production, the organic exhaust gas is discharged into the rotary valve of the equipment through the induced draft fan, and the inlet gas and the outlet gas are completely separated through the rotary valve. After the gas is preheated through the ceramic material filling layer (bottom), heat reserve and heat exchange occur. The temperature almost reaches the temperature set by the catalytic oxidation of the catalytic layer (middle layer), and then some of the pollutants are oxidized and decomposed. The exhaust gas continues to heat up through the heating area (the upper layer can be heated by electric heating or natural gas heating) and maintains at the set temperature; It then enters the catalytic layer to complete the catalytic oxidation reaction, that is, the reaction generates CO2 and H2O, and releases a lot of heat to achieve the desired treatment effect. The gas after catalytic oxidation enters the other ceramic filling layer and is discharged into the atmosphere through the rotary valve after recovering the heat energy. The exhaust temperature after purification is only slightly higher than that before waste gas treatment. System continuous operation, automatic switching. All ceramic fillings are heated, cooled and purified through the rotating valve, and the heat is recovered.

The RCO regenerative catalytic combustion unit uses rotary valves to replace the many valves and complex hydraulic equipment in conventional equipment. The removal rate of organic matter can reach more than 98%, and the thermal recovery rate can reach 95-97%.

Three. Equipment characteristics

1. Low operating cost, RCO generally when the organic waste gas reaches a certain concentration (1000mg/m3 above), the heating chamber in the purification device does not need to carry out auxiliary heating, saving costs;

2. No secondary pollutants such as nitrogen oxides (NOX);

3. Automatic control, easy operation and management;

4. High safety, purification efficiency up to 99%;

5. Efficient heat recovery, heat recovery efficiency ≥95%.